Carbide Cold Head Dies

Carbide Cold Head Dies

Metal forming The objective of the forming process is to obtain a near-net shape sample. Pressing is normally carried out at room temperature with pressures reaching up to several tons per square centimeter. There are several ways of pressing blanks: During isostatic cold pressing, the powder is...

Product Details

Metal forming


The objective of the forming process is to obtain a near-net

shape sample. Pressing is normally carried out at room temperature

with pressures reaching up to several tons per square

centimeter.


There are several ways of pressing blanks:

During isostatic cold pressing, the powder is filled into an elastic

flexible hose and pressed into a compacted form through

high liquid pressure. The powder blocks which are produced

in this way can then be processed mechanically. All common

machining methods like milling, cutting, drilling or turning may

be applied.


In uniaxial pressing, the pressing tool consists of a die and an

upper and a lower punch. The carbide powder is filled into the

die and then compacted to create the so-called green carbide,

which is ejected from the pressing die.


Extrusion pressing is mainly used to produce rectangular bar

or cylindrical rod, with or without axial hole(s). A plasticizer is

added to the powder. The resulting paste is pressed through

an extrusion nozzle. Before sintering, the plasticiser must be

evaporated in special drying furnaces.

Metal Injection Moulding (MIM) is a process used to produce

more complex forms that cannot be produced by direct

pressing. Paste preparation is similar to the extrusion

process.


Hot Tags: carbide cold head dies, China, manufacturers, suppliers, factory, wholesale, customized, cheap, design, precision, Hexagon Bolt Head Trim Tool Die, Self-Tapping Flat Machine, Hexagon Bolt Head Trim Die, Round Punch Punch Pin, Trimming Tool, Cold Forging Die

Inquiry

You Might Also Like